One problem in today?s indoor air quality lies within insufficient ventilation. Dynamic ventilation can be obtained by implementing a Demand-Controlled ventilation (DCV) system. DCV systems adjust the ventilation in a building by calculating the impact made by its? occupants.

This rapport contains an examination of the energy consumption of a kindergarten, which areas that have the largest impact on the energy consumption and what can be done to reduce those areas in ways that are relatively easy and profitable. It is also analyzed if it is possible to reduce the energy consumption from today?s consumption to a consumption that fulfils the demands placed on low energy houses by FEBY.The focus has been on reducing the energy consumption of the areas ventilation, heating system and hot water system, since those seemed to be the easiest ones to affect and since the building is quite recently built.There are different kinds of ventilation systems, at the moment the building have a CAV-system, which means that the ventilation is too high during large parts of the day. There are different ways to manage the ventilation system, for example presence detection, humidity sensors, CO2 sensors, temperature sensors and season adjustment. Many of those are in the end dependent on CO2 sensors to guarantee a good indoor climate, therefore the focus have been placed on this system.

 Autonomous cars or robot cars havebeen on the agenda ever sinceHollywood started with their Sci-Figenre, maybe even before that. A lotof things have happened since then andnow the self-driving vehicle is notfar away. In this project, theAutonomous car with microcontrollerand ultrasonic sensors, we are lookingat a way of making a small, regular RCcar autonomous with relatively simplemeans and investigate how the bigcompanies does it to learn more aboutthe development of the autonomous carsand their technology.We used an Arduino Uno R3 supplementedwith an Arduino Motor Shield R3 as ourmicrocontroller board and three HCSR04ultrasonic sensors. By removingalmost all of the old parts of the RCcar,except the two DC motors, andreplacing them with these new parts wemanaged to make a vehicle that drovearound in a room without crashing intoanything. We could have used entirelydifferent sensors, or supplemented theexisting setup with other sensors tomake it even more accurate andobstacle avoiding.

Studien går ut på att jämföra tre olika styrsystem för ventilation, nämligen CAV (Constant Air Ventilation), VAV (Variabel Air Ventilation) och DCV (Demand Controlled Ventilation). Dessa styrsystem ställs mot varandra i tre olika lokaltyper, med syfte att identifiera det mest energieffektiva styrsystemet. Ett syftet med studien är också att upptäcka vid vilka flöden det lönar sig att arbeta med VAV- och DCV-styrsystemen..

In order to detect movements and vibrations on different appliance, especially robots and self-going devices are used different sensors. One of the most used movement sensors are accelerometers. They are three different types of accelerometers one-axes, two-axes and three-axes. They can be analogue or digital. Husqvarna AB uses an accelerometer to detect movements of their self-going lawnmower Automower.

Mechanical ventilation is the most common type ofventilation in newly constructed office buildings. Therehas been an interest to utilize natural ventilationinstead of mechanical ventilation among architects andHVAC consultants in recent years. This is due to thesize of mechanical ventilation systems, which arespace consuming. The mechanical ventilation system isalso complex and requires maintenance. Furthermore,the fan uses a considerable amount of energy.

AbstractThis report is about the creation of a test system for development of a control system for a off the shelf RC-helicopter, which can be bought for about two thousand SEK. The test system consists of both electronics for controlling the helicopter and mechanical constrainer. The constrainer is used for mounting the helicopter so that it won´t crash.A circuit board including processor and sensors was manufactured. This was used for doing test of the different control algorithms. In this way were we able to analyze the quality of the sensors chosen, and what other sensors that could contribute to the control of the system.Basic helicopter control have been studied and presented in the report.

This work is an experimental study where knock sensor placements are investigated using engine tests. The aim is to studythe quality of the signal from knock sensors and how the signal for engine control is affected at different sensor locations on Scanias, engine DC13. To find out at witch position on the engine youcan get a usable signal for engine control, the engine is running while the knock sensors with advanced measurement equipment is connected to the engine. Evaluation of signals from the knock sensors are made in the computer program Matlab. The program is producing a seriesof plots, from these plots it is visually possible to draw conclusions and find connections.

ABSTRACTIntroduction: Postoperative wound infection is the third most common nosocomial infection in Sweden. The ever-growing problem of antibiotic resistance provides surgical departments a big challenge when it comes to preventing the spread of infection. Operating theatre nurses have a vital role in the prevention of infection. In addition, correct ventilation in the operating theatre is of great importance. The caregiver is responsible for quality assurance of ventilation in the operating theatre, but the work can be delegated to other staff within the department.

This report will show the energy usage of Hotel Princess in Sandviken, Sweden. When the hotel changed owner an examination of the hotels heating, ventilation and sanitary systems were done. The report showed flaws in the ventilation system, and is why the new owner wanted a closer look at the energy use of the hotel. The original building was built in the 1930s and two major extensions have been built, one in the 1950s and the most recent in the 1980s. An assumption made is that the building parts were built to the restrictions during the time. Activities on the hotel include sleep over, conference, night club, massage and swimming in the hotels pool section.

The purpose of this thesis was to investigate different methods do measure velocity of pistons in pneumatic cylinders at Bosch Rexroth Teknik AB. Through information of velocity the adjustment of a cylinders damping can be done easier.A future transducer will be used by salesmen, service personnel and customers. This requires a sensor that is easy to apply and use. It is also desirable that the sensor is cheap. A number of possible methods to measure velocity have been presented.

Bakgrund. Enligt den nya kompetensbeskrivningen för anestesisjuksköterskor framgår bland annat att anestesisjuksköterskan ska ha kompetens att övervaka och följa upp ventilation och cirkulation hos sina patienter. Det har länge varit vanligt att använda volymkontrollerad ventilation (VCV) till patienter som genomgår bukkirurgi. Nu finns det ett annat alternativ, tryckkontrollerad ventilation (PCV). Det är ett omdiskuterat ämne huruvida det mer traditionella VCV eller det senare PCV ska tillämpas på patienter som genomgår bukkirurgi.

The trend in milk production is similar in Sweden and across the world; the farms are getting fewer but increasingly bigger. The costs for hiring workers are increasing, which results in more cows per animal keeper. Sensors can then be a great tool for keeping track of animals which need special attention. With a reported decreasing fertility, sensors that can detect oestrus even at low levels can be especially helpful in bigger herds to pinpoint the cows that may be in oestrus. The number of farms with dairy cows that install AMS, Automatic Milking Systems, are increasing, and that also increases the need for sensors to control milk quality and composition when there is no visual control of the milk by a milker before milking starts.For the sensor data to be useful you have to have software designed to analyze and interpret the data to get relevant information that the farmer can use.

WesDyne TRC AB is a fully owned subsidiary of the global WestinghouseElectric Corporation. WesDyne is a world leader in non-invasive methods for theinspection of nuclear power plants. One of the inspection platforms used to scanfor defects in and around the welds in the reactor vessel is called the T-crawler.The T-crawler operates under water in a radioactive environment by stepping onthe vessel (reactor tank) inner wall using suction cups. The environment is harshand many traditional positioning sensors are not suitable for implementation. Thisthesis investigates the possibility to use a gyroscope and a pressure sensor tocreate an alternative and independent positioning system.

Within the framework of the concept of Network Based Defence (NBF) services should be available in the network, in order to increase the aggregate capacity. A common situation picture is one of these services.The aim of this paper is to answer the problem "What are the main problem areas in the creation of a situation picture in the land arena, with the help of the technical sensors that exist today?" and to develop a basis for continued research in the field situation in the concept Networking Enabled Command, Control and Collaboration (NEC3) at JCDEC (Joint Concept Development and Experimentation Centre). To answer the problem, a descriptive method is to be used in descriptions of the land arena, the information arena and the sensors and a deductive method is used when analyzing the asensors in the land arena.The problems that exist in the creation of a common situation picture, is that different types of obstacles makes it difficult for the sensors, the large number of people who are not combatants and that it is difficult to judge if a civilian vehicle is a threat, then it could be driven by civilians or by combatants..